\ Hardware\ |
---|
\ RAID Controller \ | \ Dual-active controller (Model : XS5224D / XS5216D / XS5212D / XS5226D) \Single-upgradable controller (Model : XS5212S / XS5226S) \ |
\ Processor \ | \ Intel® Xeon® D-1500 quad core processor \ |
\ Memory \ (per Controller) \ | \ DDR4 ECC 8GB, up to 128GB (four DIMM slots, insert two DIMMs or more will boost performance) \ |
\ Host Connectivity \ (per Controller) \ | \ Host Card Slot 1 (optional) \- \
- \ 4 x 16Gb FC (SFP+) ports\
- \
- \ 4 x 10GbE iSCSI (SFP+) ports\
- \
- \ 4 x 1GbE iSCSI (RJ45) ports\
- \
\
\Host Card Slot 2 (optional) \- \
- \ 4 x 10GbE iSCSI (SFP+) ports (Slot 2 provides 20Gb bandwidth)\
- \
- \ 4 x 1GbE iSCSI (RJ45) ports\
- \
\
\Onboard \- \
- \ 2 x 10GBASE-T iSCSI ports\
- \
- \ 1 x 1GbE management port\
- \
\ |
\ Expansion Connectivity (per Controller) \ | \ Built-in 2 x 12Gb/s SAS wide ports (SFF-8644)\ |
\ Drive Type \ | \ XS5224 / XS5216 / XS5212 \- \
- \
Mix & match 3.5" 2.5" SAS, NL-SAS, SED1 HDD\
- \
- \ 2.5” SAS, SATA SSD (6Gb MUX board needed for 2.5" SATA drives in dual controller system)\
- \
\
\XS5226 \- \
- \
2.5" SAS, NL-SAS, SED1 HDD\
- \
- \ 2.5” SAS, SATA SSD (6Gb MUX board needed for 2.5" SATA drives in dual controller system)\
- \
\ |
\ Expansion Capabilities \ | \ Up to 10 expansion units using XD5300 series 12Gb SAS expansion enclosure\- \
- \ XD5324 (4U 24-bay, LFF)\
- \
- \ XD5316 (3U 16-bay, LFF)\
- \
- \ XD5312 (2U 12-bay, LFF)\
- \
- \ XD5326 (2U 26-bay, SFF)\
- \
\ |
\ Max. Drives Supported \ | \- \
- \ XS5224 (4U 24-bay, LFF) : 284\
- \
- \ XS5216 (3U 16-bay, LFF) : 276\
- \
- \ XS5212 (2U 12-bay, LFF) : 272\
- \
- \ XS5226 (2U 26-bay, SFF) : 286\
- \
\ |
\ Dimension \ (H x W x D) \ | \ 19” Rackmount \- \
- \ XS5224 (4U 24-bay, LFF) : 170.3 x 438 x 515 mm\
- \
- \ XS5216 (3U 16-bay, LFF) : 130.4 x 438 x 515 mm\
- \
- \ XS5212 (2U 12-bay, LFF) : 88 x 438 x 515 mm\
- \
- \ XS5226 (2U 26-bay, SFF) : 88 x 438 x 491 mm\
- \
\ |
\ Memory Protection \ | \ Cache-to-Flash module (optional) \- \
- \ Battery backup module + Flash module (to protect all memory capacity)\
- \
- \ Super capacitor module + Flash module (to protect up to 16GB memory per controller)\
- \
\ |
\ LCM (LCD Module) \ | \ USB LCM (optional) \ |
\ Power Supply \ | \ 80 PLUS Platinum, two redundant 770W (1+1) \ AC Input \
100~127V 10A, 50-60Hz \
200~240V 5A, 50-60Hz \
DC Output \
+12V 63.4A \
+5VSB 2.0A\ |
\ Fan Module \ | \ 2 x hot pluggable/redundant fan modules\ |
\ Software\ |
---|
\ Storage Management \ | \- \
- \ RAID level 0 ,1 ,0+1 ,3 ,5 ,6 ,10 ,30 ,50, 60, and N-way mirror\
- \
- \ Flexible storage pool ownership\
- \
- \ Thin Provisioning (QThin) with space reclamation\
- \
- \ SSD Cache (QCache2)\
- \
- \ Auto Tiering (QTiering2)\
- \
- \ Global, local, and dedicated hot spares\
- \
- \ Write-through and write-back cache policy\
- \
- \ Online disk roaming\
- \
- \ Spreading RAID disks drives across enclosures\
- \
- \ Background I/O priority setting\
- \
- \ Instant RAID volume availability\
- \
- \ Fast RAID rebuild\
- \
- \ Online storage pool expansion\
- \
- \ Online volume extension\
- \
- \ Online volume migration\
- \
- \ Auto volume rebuilding\
- \
- \ Instant volume restoration\
- \
- \ Online RAID level migration\
- \
- \ SED drive1 support\
- \
- \ Video editing mode for enhanced performance\
- \
- \ Disk drive health check and S.M.A.R.T attributes\
- \
- \ Storage pool parity check and media scan for disk scrubbing\
- \
- \ SSD wear lifetime indicator\
- \
- \ Disk drive firmware batch update\
- \
\ |
\ iSCSI Host Connectivity \ | \- \
- \ Proven QSOE 2.0 optimization engine\
- \
- \ CHAP authentication\
- \
- \ SCSI-3 PR (Persistent Reservation for I/O fencing) support\
- \
- \ iSNS support\
- \
- \ VLAN (Virtual LAN) support\
- \
- \ Jumbo frame (9,000 bytes) support\
- \
- \ Up to 256 iSCSI targets\
- \
- \ Up to 512 hosts per controller\
- \
- \ Up to 1,024 sessions per controller\
- \
\ |
\ Fibre Channel Host Connectivity \ | \- \
- \ Proven QSOE 2.0 optimization engine\
- \
- \ FCP-2 & FCP-3 support\
- \
- \ Auto detect link speed and topology\
- \
- \ Topology supports point-to-point3 and loop\
- \
- \ Up to 256 hosts per controller\
- \
\ |
\ High Availability \ | \- \
- \ Dual-Active (Active/Active) SAN controllers\
- \
- \ Cache mirroring through NTB bus\
- \
- \ ALUA support\
- \
- \ Management port seamless failover\
- \
- \ Fault-tolerant and redundant modular components for SAN controller, PSU, FAN module, and dual port disk drive interface\
- \
- \ Dual-ported HDD tray connector\
- \
- \ Multipath I/O and load balancing support (MPIO, MC/S, Trunking, and LACP)\
- \
- \ Firmware update with zero system downtime\
- \
\ |
\ Security \ | \- \
- \ Secured Web (HTTPS), SSH (Secure Shell)\
- \
- \ iSCSI Force Field to protect from mutant network attack\
- \
- \ iSCSI CHAP authentication\
- \
- \ SED drive1 support\
- \
\ |
\ Storage Efficiency \ | \- \
- \ Thin Provisioning (QThin) with space reclamation\
- \
- \ Auto Tiering (QTiering2) with 3 levels of storage tiers\
- \
\ |
\ Networking \ | \- \
- \ DHCP, Static IP, NTP, Trunking, LACP, VLAN, Jumbo frame (up to 9,000 bytes)\
- \
\ |
\ Advanced Data Protection \ | \- \
- \ Snapshot (QSnap), block-level, differential backup\
- \
- \ Writeable snapshot support\
- \
- \ Manual or schedule tasks\
- \
- \ Up to 64 snapshots per volume\
- \
- \ Up to 64 volumes for snapshot\
- \
- \ Up to 4,096 snapshots per system\
- \
\ - \
- \ Remote Replication (QReplica)\
- \
- \ Asynchronous, block-level, differential backup based on snapshot technology\
- \
- \ Traffic shaping for dynamic bandwidth controller\
- \
- \ Manual or schedule tasks\
- \
- \ Auto rollback to previous version if current replication fails\
- \
- \ Up to 32 schedule tasks per controller\
- \
\ - \
- \ Volume clone for local replication\
- \
- \ Configurable N-way mirroring\
- \
- \ Integration with Windows VSS (Volume Shadow Copy Service)\
- \
- \ Instant volume restoration\
- \
- \ Cache-to-Flash memory protection2\
- \
- \ M.2 flash module\
- \
- \ Power module: BBM or SCM (Super Capacitor Module)\
- \
\ - \
- \ USB and network UPS support with SNMP management\
- \
\ |
\ Virtualization Certification \ | \- \
- \ Server Virtualization & Clustering\
- \
- \ Latest VMware vSphere certification\
- \
- \ VMware VAAI for iSCSI & FC\
- \
- \ Windows Server 2016, 2012 R2 Hyper-V certification\
- \
- \ Microsoft ODX\
- \
- \ Latest Citrix XenServer certification\
- \
\ |
\ Easy Management \ | \- \
- \ USB LCM2, serial console support, online firmware update\
- \
- \ Intuitive Web management UI, secured web (HTTPS), SSH (Secured Shell), LED indicators\
- \
- \ S.E.S. support, S.M.A.R.T. support, Wake-on-LAN, and Wake-on-SAS\
- \
\ |
\ Green & Energy Efficiency \ | \- \
- \ 80 PLUS Platinum power supply\
- \
- \ Wake-on-LAN to turn on or wake up the system only when necessary\
- \
- \ Auto disk spin-down\
- \
\ |
\ Host Operating Systems Support \ | \- \
- \ Windows Server 2008, 2008 R2, 2012, 2012 R2, 2016\
- \
- \ SLES (SUSE Linux Enterprise Server) 10, 11, 12\
- \
- \ RHEL (Red Hat Enterprise Linux) 5, 6, 7\
- \
- \ CentOS (Community ENTerprise Operating System) 6, 7\
- \
- \ Solaris 10, 11\
- \
- \ Free BSD 9, 10\
- \
- \ Mac OS X 10.11 or later\
- \
\ |
\ Warranty & Regulatory\ |
---|
\ Warranty \ | \ System : 3 years \
Battery backup module : 1 year \
Super capacitor module : 1 year \ |
\ Regulatory \ | \ CE, FCC, BSMI, VCCI, KCC\ |
\ Operating Environment\ |
---|
\ Temperature \ | \ Operating temperature : 0 to 40°C \
Shipping temperature : -10 to 50°C \ |
\ Relative Humidity \ | \ Operating relative humidity : 20% to 80% non-condensing \
Non-operating relative humidity : 10% to 90% \ |